How To Install Vinyl Graphics
Image caption goes here.

Things you will need before you proceed.

1. Paper Towels.

2.Windex Or Glass Cleaner (without ammonia)

3. Flat Tool Squeegee or Credit card

4.Masking Tape and Level.

5.Vinyl Graphics to Install From InCrediStyle.com

• They will last for least 5 years Outside (pic 0)
• They are easy to install
• Can be removed with ease

Step 1 Clean area that item's are to be installed

*Note All grease, Tar, Wax, and/or any other products must be removed from application area to insure the products will retain max life.

Step 2 Wait for area to dry.

Step 3 Use the level to make your ordination line just below were you wish to apply. (pic 1) Then with the Mask tape Mark a line to use to make sure it is level. (pic 2)

Step 4 With your flat surface rub down on the front of the Graphic. (pic 3)

Step 5 Remove the backing from the graphic (pic 4)

Step 6 Place graphic on area. Best if Application from one side to the other smoothing with your Squeegee. (pic 5)

Step 7 Remove Application tape and allow to set overnight.  (pic 6)

Enjoy  (pic 7)

Send mail to Jasonspero@incredistyle.com with questions or comments about this web site.
Last modified: 06/20/05